Staticworx remains open. Please read our Covid-19 message.
We use cookies on our website to provide you with the best possible experience. Your consent and further use of this site means you agree to the use of cookies. You'll find more information on our privacy and data protection policy here.

I agree

East Coast: 617-923-2000 | West Coast: 949-933-0177 || Contact Us

GroundTack® Installation Adhesive

Looking to reduce installation labor, install tile faster, get on the floor sooner and eliminate downtime and shutdowns?
Staticworx has your solution.

The best part.
You can achieve these goals for half the cost
of an ugly loose lay floor.

The Problem:

Most suppliers provide carbon black and dark graphite adhesives. These adhesives are troweled on the floor and the tiles must be placed in them while the adhesive is still wet. This yields a slow and messy installation. Dark wet adhesive often seeps through the seams when the floor is rolled. The only way to contain the mess from seepage is to wipe off tiles with solvents and mineral spirits and rollers while the adhesive is still wet. If the adhesive is allowed to dry, the floor tiles are stained.

The Solution:

Staticworx developed GroundTack pressure sensitive adhesive to replace wet set adhesives. GroundTack eliminates seepage and messy installations. Unlike wet set epoxies and conductive one part acrylic emulsions, Groundtack is allowed to dry completely before tiles are installed. This eliminates seepage during rolling. The adhesives bonds upon contact and this allows the floor to receive immediate traffic. GroundTack enables your installation team to install our precision milled tiles up to 30% faster than other products. And because our tiles are produced with the best squareness tolerances in the industry, you won't see any adhesive in the seams. And the best part: You can install GroundTack in occupied spaces.

The Benefits:

$ Lower Final Cost: Ameriworx tile installed with GroundTack eliminates the incentive to buy expensive loose lay and interlocking click together floors. Why spend a lot of money when you can get a more durable, better looking solution for 40% less than the cost of the more expensive solution?

No Shutdowns During Installation: GroundTack is odorless and certified for emissions by FloorScore. The use of GroundTack adhesive allows the installer to lay tile without interrupting the client's operation. This means no shutdowns and immediate access to the space after the tiles are placed.

Tighter Installation: Working on a dry pressure sensitive adhesive enables the installer to employ the pyramid installation method for large areas. This method reduces the possibility of variance and cutbacks found in jobs where the tile was installed in rows. It also helps prevent gaps because the geometry of fitting tiles into a pyramid (instead of linear rows) forces the tiles to fit together tighter. A gap-free installation yields a cleaner facility because there are no seams to trap dirt and other contaminates.

Staticworx ESD floors can be installed fast and easy in occupied spaces with GroundTack® Conductive Adhesive

For more information on GroundTack® Adhesive

Click Here

Resources/Technical Info

Groundtack® Safety Data Sheets

English Version

French Version

Spanish Version

To order: Call (617) 923-2000 or Email to