East Coast: 617-923-2000 | West Coast: 949-933-0177 || Contact Us

Harmony SD Rubber Series Rubber Tile

Static Dissipative Rubber Flooring
for Light duty and Mission Critical Applications

Static control and aesthetically pleasing don't have to be mutually exclusive properties. Harmony SD is available in ten attractive colors and special Expanded Colors are available, giving architects and designers even more choices of this visually attractive static control floor. This static dissipative style is ideal for use in engineering offices, data centers, server rooms, labs, access flooring installations and emergency call centers. Like all Staticworx® rubber, Harmony SD rubber flooring exceeds the ADA slip resistance requirements and is PVC free and Phthalate free.

ALERT
Not recommended for Class Zero, Munitions, Explosives and Ordinance applications. We recommend EC ESD Rubber for these applications.


Smoke Embers


Morning Dew


Nantucket Fog


Mauve Mist


Red Rock


New Chestnut


Country Comfort


Pleasant Valley


Mystic Blue


Hemlock


Antarctica


Hudson Bay

Specifications

Thickness: 2.0 mm

Tile Size Available: 24 x 24 inches

Roll Size Available: 49.2' x 48"

Electrical Properties: ESD S7.1\ASTM F-150 RH >30% at room temperature

Dissipative: 106 < 109

  • Static dissipative.
  • 5 year limited wear warranty.
  • 10 year limited conductivity warranty.
  • 3 colors available for access floor panels.
  • 10 colorways in multicolor chip pattern

PVC Free

ANSI

Test Methods and Results for Harmony SD Rubber

  • ESD STM 97.2- (Voltage Generation of Flooring in Combination with a person)
  • Industry Standard Heel Straps with 1meg-ohm resistor, utilized for evaluation.
  • All materials (Flooring, Heel Straps) were conditioned at 12% RH for 72 hours before test
  • Test completed in 12% RH condition
  • The maximum and minimum absolute values from each test is reported

Compliance with ANSI/ESD S20.20-2007

This standard stresses the importance of two test methods when evaluating ESD Control Flooring:

Voltage Measurement on a Person

ANSI/ESD S20.20 suggests that your floor should not generate more than 100 volts on a person's body. Staticworx® Harmony SD Rubber Flooring will not generate more than 10 volts on a person's body. (In conjunction with conductive footwear, using ESD STM 97.2) Resistance Measurement in Combination with a Person - This test method takes into account the person and their footwear. Test results show that Staticworx® static dissipative rubber flooring measures below the ANSI/ESD S20.20 recommended limit of 35 meg-ohms to ground (using ESD STM 97.1)

Maintenance

The advantage of the non-porous surface, of Staticworx® rubber floor coverings, combined with a "StainBlock" high density surface permits easy and inexpensive cleaning. The extremely hard wearing surface of Staticworx® rubber floor coverings offer a whole series of advantages in care and maintenance

Conductive Adhesive Options

Option Rubber Static Dissipative
Tiles and Sheet
GroundTack Conductive Adhesive** No
Statbond™ Counductive Adhesive, 1 Part Acrylic** Yes
Non Conductive, Pressure Sensitive Adhesive No
Conductive, 2-Part Epoxy Adhesive Yes
Dry, Conductive Adhesive
(available in rolls)
No
Staticfix, flooring installation tape
(available in rolls)
Yes

To order: Call (617) 923-2000 or Email to

top