StatBond Info Sheet
Rhino Recycled RC Rubber, Static Dissipative Tile
Rhino Recycled RC Rubber Maintenance
CSI Master Spec EC Rubber (.doc)
Rhino rubber RC is everything you could want for the planet!
RC rubber is comprised of 100% post-consumer tire rubber salvaged from America's landfills. It's vast array of color choices are achieved from color mixes containing 30% pre-consumer waste. These special characteristics give it a high potential to earn LEED credits when specified on jobs.
RC Rubber Colors
Midnight Lavender
Blue Hawaii
Bachelor Button
Coffee Husk
Sunflower Seed
Star Gazing
Geranium
Black Spruce
Birch Bark
Red Rock
Terra Cotta Cream
Star Cluster
Blue Moon
Sewn Seeds
Tropical Fish
Due to variations in printed materials and computer monitor displays, color shown may not be exact.
For true accurate color, please
to request an actual sample, or call (617) 923-2000.
Performance Attributes
|
|
Product Specifications
Rhino Rubber ESD products meet static dissipative flooring criteria based on ASTM F150 and ESD Association Standard ANSI/ESD- S7.1 -2005
| Rhino Rubber RC Rolls - Stock | ||
| Width: | 48" | |
| Thickness: | 3.5mm (1/8") | standard |
| 6mm (1/4") | special | |
| Weight: | 3.5mm | approx. 1.1lbs/sq.ft. |
| 6mm | 1.7lbs/sq.ft. | |
| Length: | 200 sq/ft (50 l/ft) per roll | |
| Rhino Rubber RC Tiles - special Order | ||
| Size: | 36" x 36" | |
| 18" x 18" | ||
| Thickness: | 3.5mm (1/8") | standard |
ASTM Sustainability Assessment
| Test | ASTM | Results |
| Tensile Strength | D412 | 200 lb/in² min |
| Flexibility | F137 | Pass ¼ inch mandrel |
| Static Dissipation | F150/ESD S7.1 | 106 to 109 Ohms |
| Coefficient of Friction | D2047 | >0.9 |
| McBurney Indentation | F142, 1 min | 0.1120 inches |
| Thermal Conductivity | C518 | 0.406 Btu-in/hr-ft²-°F |
| Static Load Limit | F970, 400 lbs | <0.005 in |
| Electrostatic Propensity | AATCC Test method 134 | -0.8 kv |
| Static Decay | FTM 4046 of FS 101B | 0.01 seconds |
| Chemical Resistance | F925 | no change |
| Impact Insulation Class | E492 | 49 |
| Sound Transmission Coefficient | E413 | 51 |
| Noise Reduction Coefficient | C423 | 0.10 sabine/ft² |
| Sustainability | E2129-01 | data collected |
| VOC Washington State IAQ Test | n/a | 24hr=0.39; 1wk=0.056 |
LEED Credit Areas Impacted by Flooring
| LEED-NC | LEED-CI | LEED-EB |
| General | ||
| Applies to whole buildings | Applies to tenant improvements of new or existing office space | Applies to facility management polices and measured performance |
| Materials & Resources | ||
| MR 2: 1 point if 50% of construction debris is diverted from landfills; 2 points for 75% | MR 2: Same as NC | MRc2 offers points for green purchasing, including building materials, at a rate of 1 point for each 10% of confirming purchases. Points may be earned by specifying Rhino Rubber RC through the following criteria: - Materials contain at least 10% post-consumer or 20% pre-consumer material - Contains at least 50% materials harvested and processed within 500 miles of the project |
| MR 4: 1 point if 10% of all materials contain recycled content; 2 points for 20% |
MR 4: Same as NC | |
| MR 5: 1 point for using 10% of the materials that are extracted, harvested or recovered, as well as manufactured within a 500 mile radius of project site; 2 points for 20% . |
MR 5.1: 1 point for using 20% of building materials that are manufactured within a 500 mile radius | |
| MR 5.2: 1 additional point for using 10% of locally manufactured materials that are extracted or harvested within a 500 mile radius. | ||
| Indoor Environmental Quality | ||
| EQ 4.1: 1 point for using adhesives and sealants that meet SCAQMD | EQ 4.1: Same as NC; 1 point for using adhesives and sealants that meet SCAQMD and aerosol adhesives that meet Green Seal Standard GS-36 | MRc3 provides up to 2 points for using low-emitting materials. One point may be obtained for each 45% of annual purchases calculated on a dollar value that conform for the same categories as NC (including using adhesives with a VOC content less than SCAQMD). |
Conductive Adhesive Options
| Adhesive Options | EC Rubber Sheet |
| GroundTack Conductive Adhesive** | Yes* |
| Statbond™ Counductive Adhesive, 1 Part Acrylic** | Yes |
| Non Conductive, Pressure Sensitive Adhesive | Yes |
| Conductive, 2-Part Epoxy Adhesive | Yes |
| Dry, Conductive Adhesive (available in rolls) |
Yes |
| Staticfix, flooring installation tape (adhesive alterative), available in rolls | Yes |
*Contact Staticworx for specific details at 617-923-2000.
**Available for immediate shipment
Available in 1-gallon and 4-gallon pails, Groundtack and Statbond ESD, Conductive Adhesives can be ordered directly from Staticworx by calling 617-923-2000.
Understanding Moisture and Adhesives
You need to understand moisture vapor testing before installing any static control flooring adhesives on new or old concrete. Visit our moisture vapor information section. Be sure to test your concrete for moisture. Order a Moisture Test Kit, also known as a Anhydrous Calcium Chloride Moisture Test Kit, from Staticworx for $14.00 + shipping.
Call 617-923-2000 to order.
