ESD Floor Runners and Mats: Aisle-Safe

Looking for Rubber Table Mats? Click here

The ideal solution for strategic grounding of aisleways, corridors,
and work areas

The only light colored static conductive floor runner and matting on the market. Attractive and durable, this ESD safe runner is ideal as a static free
Rubber matting in an industrial settingbridge between ESD safe areas. It can be used as runner, floor mat, or even as permanent flooring material.

Aisle-Safe’s permanent “static conductive” construction meets any Class 0,
DOD 4145.26-M and ANSI/ESD S20.20 requirement. Lay-flat, 2 millimeter thickness allows for easy rolling of chairs and carts without curling.
Protects below 10 volts walking body voltage generation BVG.

For use in: Labs, Data Centers, Server rooms, Electronics Manufacturing, Emergency 9-1-1 Communication Applications, Clean Rooms.

Quick Links: Features | Specs | Colors | Sizes

Features

Aisle-Safe ESD Floor runners and mats

  • Meets Class 0
    Zero outgassing makes this the right choice for temporary and permanent clean rooms cleanrooms.
    Image courtesy of Terra Universal
    Image: portable clean room
  • Clean room compatible
  • Non-slip, ergonomic surface
  • Exceeds ASI/ESD S 20.20
  • Includes ground cord
  • PVC-free
  • No outgassing
  • California Section 1350
  • Natural, Earth-friendly, rubber
  • Guaranteed to lay flat
  • Meets all clean room applications
  • Zero out-gassing
  • Lifetime Warranty
  • Maintained by wet mopping
  • Lifetime Conductivity

Specifications

Staticworx® Aisle-Safe Rubber Mats
Construction

Two-layer, vulcanized conductive rubber with high quality natural and industrial rubber components.
Sizes

4’ x 5’6”, 4’ x 7’9”, 4’ x 40’. All are 2 mm thick.
Standard ASTM F 1344, for solid color, homogeneous tiles and through-mottled tiles as applicable
Hardness ASTM D 2240, Shore A, not less than 85
Slip Resistance Static co-efficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance
Asbestos-Free Products shall contain no asbestos
Flammability ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class-1
Smoke Density ASTM E 662, NFPA 258, NBS smoke density, less than 450
Burn Resistance Solder burn resistant
Halogen-Free
PVC-Free 		Products shall not contain halogen. Products shall not contain poly-vinyl-chloride
Conductivity

<1.0 x 10 to the sixth resistance to ground when tested according to ASTM F 150 and ESD.S7.1 under >30% relative humidity at room temperature

Lifetime conductivity per guidelines of ANSI/ESD S20.20
Decay Time

.025 seconds for Staticworx when tested according to FTM 4046 101
Static Generation

< 20 volts when tested according to ESD STM 97.2
Abrasion Resistance

Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.70
System Resistance

< 1.0 x 10 to the sixth per ANSI/ESD STM 97.1 with conductive footwear (meets or exceeds recommended guidelines of ANSI/ESD S20.20)

Aisle-Safe Rolls Ready to ShipDownload a pdf of these specs download a pdf

-Quick-Ship Colors*
Largo Presto
Largo ESD Rubber Presto ESD Rubber

 

Call StaticWorx at 617-923-2000 or click here for pricing and lead times.

*Custom sizes are available.
Call StaticWorx at 617-923-2000 or click here for pricing and lead times.

< top >